Lines · Draw or tap out a line, or the corners of an area

Measure distance on a map of Texas

Measure distance on a map of Texas by tapping out a line, corner by corner, over aerial imagery. The length appears instantly, in feet or miles.

It is the plan distance. On steep ground the fence you buy is longer; draw the same line with Elevation Profile to get the climb.

Switch to Area and tap the corners of a pasture, building envelope or planting area to get its area in acres and the length of fence around it.

Free to run · pay to download

Free to run, and free to save as a PNG image of the map. This tool has no file export of its own. For the terrain as a file, Download Data exports contours, a GeoTIFF or a 3D mesh with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months.

Who uses this

  • Farmers, ranchers and owners. Price a fence, a hedge or a pipe run before pacing it out.

When to use it

  • A quick length for a fence line, a pipe run, a hedge or a boundary before you pace it out.
  • Checking how far apart two places are without the terrain getting in the way.
  • The acres in a pasture, a building envelope or a planting area, and the length of fence that goes around it.

Tools for your job

Measure is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.

For the job: Hikes, runs and rides

How much climbing, and how far?

  1. 1.Elevation Profile — Distance, total climb and descent, and the steep sections.
  2. 2.Elevate a File — Replaces the noisy altitude in a GPX from a watch or phone with lidar ground elevation.
  3. 3.Measure (this tool) — A quick flat distance between points.

How to use it

  1. Open Measure and tap out the line, corner by corner. Undo removes the last point.
  2. Choose Done. The panel shows the total length and how many points the line has.
  3. For an area, choose Area first, tap each corner in order and choose Done. The last corner joins back to the first, and the shape is shaded on the map.
  4. Draw a new line, or Draw a new area, to start again.

Step by step: Enchanted Rock

We measure the same line from the foot of the dome to its summit.

1.Open Measure, tap out the line and choose Done.

2.The panel shows the map length of the line and the number of points. The line climbs steeply, so the walk is a little longer; Elevation Profile shows the climb.

What it showed

  • Measure gives flat distance only. For climb and grade, draw the same line in Elevation Profile.

How it works

The length is computed on the earth’s surface between each pair of corners and added up. No elevation is read, which is why the result is instant and works anywhere on the map.

Reading the results

This is the plan distance, as a map or a site plan would show it. On steep ground the distance you walk, or the fence you buy, is longer: about 6% more on a 20-degree slope and about 15% more on 30 degrees.

For the climb along the same line, and the grade of each section, draw it with Elevation Profile instead.

In Area mode the panel shows the area in square feet below an acre and acres above, and the perimeter, including the side from the last corner back to the first. If the sides cross, the area is wrong and the panel says so.

Limits and caveats

  • Flat distance only. It does not follow the rise and fall of the ground.
  • Accurate to where you tap. Zoom in for corners that matter.

Data and attribution

Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Texas, so Sunlight, Viewshed and Sightline work from the terrain alone.

USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.

Questions

Does it allow for slope?

No. It is flat map distance. On a 20° slope the ground distance is about 6% longer, on 30° about 15%.

Can it measure the area of a field?

Yes. Choose Area, tap each corner in order and choose Done. The last corner joins back to the first, and the panel shows the area in square feet or acres and the perimeter. It is the flat map area, not the area up and down the ground.

Ready to try it?

Open Measure on the map →

Free to use, no account. The analysis runs in your browser on public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.

Missing something you need? Suggest a feature or ask about custom work.