Lidar Data for Texas: A Guide to the State's Elevation Data

Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. This guide explains what lidar is, how Texas was flown, what the data covers and how you can use it for contour maps, elevation profiles and 3D terrain models without specialist GIS software.

Skip the technical part

Use Texas's lidar straight away: contours, elevation profiles and 3D models in the browser, with no raw files to download and no GIS software to install.

Use lidar data now →

What is lidar?

Lidar stands for light detection and ranging. A scanner fires rapid laser pulses and times how long each one takes to come back. Combined with the aircraft's GPS position and an inertial measurement unit, every return can be placed precisely in three dimensions.

The lidar behind the USGS model is airborne: a scanner under a plane or helicopter sweeps the ground in overlapping strips. The result is a point cloud — millions or billions of points, each with an easting, a northing and an elevation, plus attributes such as return intensity and classification.

What makes lidar so valuable for terrain is that one pulse can produce several returns. The first may hit the top of a loblolly pine; the last may reach the ground beneath it. Keeping only the ground returns gives a bare-earth digital elevation model (DEM) that shows the true shape of the land, even under the dense forest of the Piney Woods or the cedar brush of the Hill Country.

Texas's lidar program

Texas's lidar has been flown project by project, each over its own block of the state, at different times and to different specifications. The Texas Geographic Information Office (TxGIO) distributes Texas lidar through its StratMap elevation and lidar page. Each project's own metadata gives its date, cell size and reported accuracy.

At the national level, the USGS 3D Elevation Program (3DEP) gathers lidar into one seamless bare-earth model of the United States, and it is the model every elevation on this site comes from.

Lidar coverage in Texas

Ground elevations come from the USGS 3D Elevation Program (3DEP) seamless bare-earth model, with elevations above NAVD 88. Source cells are 3.3 ft per pixel in the finest work units, with about 9.8 ft per pixel and 33 ft per pixel sources elsewhere. USGS elevation data is public domain. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. The projects differ in age and point density, and the USGS index can list more than one lidar work unit for the same place. More from the USGS 3D Elevation Program and Texas elevation and lidar resources.

For any specific address, the lidar coverage page shows whether a lidar work unit covers it and which work units the USGS 3DEP index lists there, with their year and other details where the index records them.

Accuracy and resolution

Vertical accuracy

Accuracy depends on the source project, its date and how well ground was measured; this site does not assign one accuracy figure to all Texas. Source cells range from 3.3 ft per pixel in the finest work units to about 9.8 ft per pixel or 33 ft per pixel in coarser sources. Every download reports the share outside the finest lidar work units, or says coverage is unknown if the index cannot be reached. Bare-earth elevations exclude buildings and tree canopy and do not replace a surveyed elevation for legal or engineering decisions.

Point density

Point density is how many laser pulses were recorded per square foot. It decides how much terrain detail survives under trees and how sharply small features such as ditches, curbs and retaining walls show. Each project's metadata gives its pulse density, and the coverage checker shows it for the point you search where the USGS index records it.

Ground classification

A raw point cloud contains returns from everything: trees, buildings, power lines, vehicles and the ground. Points are classified so the ground returns can be separated from everything above them. The ground returns become the bare-earth DEM; the full cloud can become a surface model that includes trees and structures. This site uses the bare-earth DEM only.

DEM resolution

Where lidar meets the USGS standard for its finest DEM, the 3DEP seamless model is 3.3 ft per pixel: each cell is 3.3 ft on a side. That is fine enough to show drainage ditches, terrace edges and individual landforms that disappear on coarser satellite-derived models.

Use lidar-derived elevation data straight away

Texas Elevation Tools processes the lidar for you. Contours, elevation profiles and 3D terrain models in seconds, with no GIS software or raw downloads.

How to get Texas lidar data

Option 1: raw data (for GIS professionals)

The National Map Downloader serves 3DEP DEM tiles and lidar point clouds (LAS/LAZ), and TxGIO distributes Texas lidar downloads. Working with the raw data takes:

  • GIS software such as QGIS or ArcGIS Pro, or point-cloud tools for LAS/LAZ files;
  • an understanding of coordinate systems and datums, because tiles, mosaics and your own data may each use a different projection and unit (metric or US feet);
  • disk space and processing power, because point clouds are very large;
  • tile management, because data is distributed as tiles that you download, merge and clip yourself.

Option 2: processed results in Texas Elevation Tools (for everyone)

Select an area on the map and choose what you want. You can:

What you can do with lidar elevation data

Contour lines

Lidar supports contours at intervals far finer than those printed on published topographic maps, down to 1 ft — the detail needed for building pads, driveways and drainage.

Elevation profiles

Draw a line and read the ground along it. Hikers use profiles to judge a climb up Guadalupe Peak; engineers use them for roads, pipelines and fence lines.

3D terrain models

Turn any area into a printable model — Enchanted Rock, Palo Duro Canyon, the Chisos Mountains, or your own valley.

Flood and hazard work

Fine elevation data underpins flood modeling along the Gulf Coast bayous and the Hill Country's rivers. This site's Water & Drainage tool shows where water would run and pond on the ground surface.

Land planning and building

Builders, architects and landowners use lidar to understand a site before design starts: earthwork, building pad placement, stormwater and views. It helps you prepare for a permit conversation with the city, or with the county for subdivision, floodplain and septic rules; it does not replace a survey where one is required.

Forestry and ecology

The bare-earth model shows streams, draws, terraces and erosion under the trees, from the Piney Woods to the Hill Country. This site does not measure the trees themselves.

Lidar versus other elevation sources

Global satellite models cover the whole planet but at roughly 100 ft per cell or coarser, and many record the top of the forest rather than the ground. Good for a regional overview, not for site work.

Consumer GPS gives an altitude from satellite geometry or a barometer, and it is usually the least accurate part of a recorded track, especially in valleys and under forest.

Lidar (USGS 3DEP) gives true bare-earth elevation through vegetation, at 3.3 ft per pixel where the lidar meets the USGS standard for its finest DEM. For any serious terrain work in Texas it is the right source.

Using lidar without GIS software

Historically, using lidar meant specialist software, large downloads and a good grasp of projections. Texas Elevation Tools removes those steps. You do not need to:

  • download gigabytes of point clouds or DEM tiles;
  • install QGIS, ArcGIS or any other GIS software;
  • understand coordinate systems, datums or metric-versus-feet units;
  • manage tile indexes or merge datasets;
  • run geoprocessing workflows.

Pick an area, choose the output and download it. That puts lidar within reach of hikers, landowners, students, architects and anyone else who needs accurate terrain information.

Licensing

USGS 3DEP elevation data is a U.S. Government work in the public domain: you may use it, including commercially. A credit to the USGS 3D Elevation Program is appreciated. TxGIO lidar downloads carry TxGIO's own terms and credit. Every file from Download Data carries the USGS credit.

Frequently asked questions

What is the best resolution of elevation data available for Texas?

The USGS 3DEP seamless bare-earth model is 3.3 ft per pixel wherever a lidar work unit meets the USGS standard for its finest DEM, as it does around Houston, Amarillo and Big Bend. Elsewhere the seamless model uses coarser data, down to 1/3 arc-second, about 33 ft per pixel.

Is lidar available for the whole state?

Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. Check a specific address on the lidar coverage page to see which project covers it and when it was flown.

How often is the lidar updated?

Lidar is flown project by project, so the date of the data differs from place to place; the lidar coverage page shows the project and year behind any address. The USGS 3DEP elevation service this site reads was published as of September 28, 2026.

Can I use Texas lidar data for commercial purposes?

USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.

What is the difference between a DEM and a DSM?

A digital elevation model (DEM) is the bare ground with trees, buildings and other structures removed. A digital surface model (DSM) is the top of whatever stands there, including tree crowns and roofs. For contours, drainage and elevation profiles you want the DEM. This site has no DSM, so every tool on it is bare earth.

Do I need GIS software to use lidar data?

To work with raw point clouds and GeoTIFF tiles, yes. Texas Elevation Tools reads the same public data and returns contour lines, elevation profiles, 3D models and elevation-enriched GPS files in the browser, with nothing to install.

Data sources and further reading

These are the public sources behind the site. Check the source for the actual location and product you need; terrain, parcels and map imagery have different coverage and terms.

Primary sources

  • USGS 3D Elevation Program (3DEP) seamless DEM — The bare-earth source for terrain tiles, contours, profiles, statistics, downloads and elevation added to files. Source resolution varies: 3.3 ft per pixel in the finest work units, with older lidar and coarser seamless data elsewhere. Elevations are above NAVD 88. Public domain. Selecting a fine output grid cannot create detail missing from the source.
  • Texas Geographic Information Office (TxGIO) StratMap elevation lidar — The state’s lidar program and downloads for Texas. This site uses the USGS 3DEP index for work-unit coverage and available project metadata; it does not infer an acquisition date or accuracy for all Texas from one project.
  • TxGIO StratMap Land Parcels — Statewide parcel boundaries compiled by the Texas Geographic Information Office from county appraisal district data. The Property tool queries the public statewide service. Local gaps, outdated boundaries and missing property IDs can occur; no parcel found is not proof that land is unowned. Parcel maps are not legal surveys.
  • USGS Geographic Names Information System (GNIS) — Texas place names for search, including towns, peaks, lakes, streams and other named features.
  • Basemaps — USGS Topo and Esri World Imagery — USGS Topo, shaded relief rendered from 3DEP, and Esri World Imagery (Imagery: Esri, Maxar, Earthstar Geographics, and the GIS User Community) provide map context. The aerial basemap is display-only. Downloadable aerial photos come from public-domain USGS NAIP imagery.

Search, basemaps and terms

Related guides