Water · Select a property, draw a box or polygon, or upload a boundary
Drainage map for your property: where water flows and ponds
This drainage map for your property shows where water flows across the ground in heavy rain and where it will pond once the low spots fill. Each overland flow path is traced from the USGS 3DEP lidar model and labeled with the acres of land draining through it; ponding areas come with depth, area and volume.
It picks up the small paths too, down to 0.25 acre of catchment, clipped to your boundary, and exports them as GeoJSON or KML for a drainage designer.
Free to run · pay to download
See the full result on the map free, with no account. Download the flow paths as GeoJSON or KML, and a finished map of them as a letter-size PDF with your own title, a legend and a scale bar with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months, a one-off payment in US dollars that never renews. Every download on the site is included while the pass lasts.
Who uses this
- Landowners. Find where water runs and sits before siting a house, a shop or a driveway.
- Drainage and landscape designers. Plan swales, French drains and culverts on real flow paths.
- Farmers and ranchers. See which draws carry the most water and where fields pond.
When to use it
- Checking whether a flow path crosses a house site, a building pad or a driveway before you buy or design.
- Finding where water runs across a property after heavy rain, and which draws carry the most.
- Locating low spots that will hold water, for drainage design or to avoid siting a building there.
- Planning culverts, swales and fence crossings, with the land draining to each path to size them from.
Tools for your job
Water & Drainage is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Buying a lot or rural acreage
What is the ground like, and how does it compare with the others on my list?
- 1.Property — Selects the parcel from the statewide appraisal-district map so every other tool is clipped to the boundary.
- 2.Property Report — A PDF with contours, slope, aspect, winter sun, drainage and elevation for that parcel, or several selected together.
- 3.Saved Properties — Up to 5 places side by side: elevation, slope, winter sun and drainage.
- 4.Water & Drainage (this tool) — Terrain flow paths and potential ponding; rainfall and flood extent are not modeled.
- 5.Aerial History — Historical aerial photos of the spot, swiped against today: old roads, buildings and clearings.
For the job: Drainage, flooding and wet ground
Where does the water go, and where will it sit?
- 1.Water & Drainage (this tool) — The overland flow paths across an area, sized by the land draining through them, and where water ponds once low spots fill.
- 2.Downhill Path — Where rain from one spot ends up: the line it runs, and the stream it reaches.
- 3.Wetness Map — Which parts of a field the shape of the land keeps wet.
- 4.Catchment — All the land that drains to one culvert, draw or low corner.
- 5.Landforms — Hollows, valleys and footslopes at a glance: where water gathers.
How to use it
- Select a property, draw an area or upload a boundary.
- Run. Switch between the Flow paths and Ponding views in the panel.
- Tap any flow path to see how much land drains through it.
- Export the flow paths as GeoJSON or KML to open in GIS, CAD or Google Earth.
- To route water through a culvert the lidar can’t see, or around a berm, draw it under Culverts & barriers and run again.
- Or choose Make a map for a finished letter-size landscape PDF: the flow paths over the aerial photo with your own title and note, a legend, a scale bar and the data credit. Both need a pass.
Step by step: Enchanted Rock
We follow where rain runs off Enchanted Rock, and where it would pond.
1.Zoom to the area or select a property, then choose Preview on map.
2.The flow paths: the panel gives their total length and the land draining through the largest. Each line is classed by the land upstream of it, and tapping a line shows how much drains through it.
3.Switch to Ponding. The panel gives the area, the greatest depth and the volume. Long blue strips along a road usually mean a culvert the terrain does not know about.
What it showed
- Check where the larger flow paths run before placing a building, a driveway or a septic system.
- Culverts and pipes are not in the terrain, so water backed up behind a road fill is a place to check, not a prediction.
How it works
Small pits in the USGS 3DEP bare-earth model are filled so water can always find a way downhill. Each cell then passes its water to its steepest neighbor, and the land upstream of every cell is added up. The terrain loaded reaches beyond your boundary, so water arriving from neighboring land is counted at its true size.
Cells draining at least 0.25 acre are joined into flow paths and grouped by that upstream area into four classes: minor flow path (under 1 acre), overland flow path (1–25 acres), watercourse (25–250 acres), stream or river (over 250 acres). On large areas the smallest path drawn rises so the map stays readable, and the panel says where the cut-off sits.
Ponding compares the filled surface with the original ground: wherever the fill raised the ground, water would stand there, and the difference is the depth.
Reading the results
Thicker, paler lines drain more land. The figure on each line is the area of land upstream of it, the number a culvert or swale is sized from.
Ponding depth, area and volume describe the low spot when full. Real ponds drain into the soil and evaporate, so these are upper bounds.
Limits and caveats
- This is a screening map of where the ground sends water, not a flood hazard map. It does not say how deep or fast water would run in a given storm.
- Culverts, pipes, levees and ditches narrower than the sampling are not in the terrain, so water is routed over roads and through embankments, unless you draw them under Culverts & barriers.
- A drawn barrier changes where water goes, but the depth of water it would hold back is not modeled in Ponding.
- Bare-earth lidar has buildings removed, so paths are drawn straight through existing houses.
- A large river’s catchment reaches far beyond any area you can draw, so its acreage is a lower bound. Use Catchment to trace one point further upstream.
- Outside the finest lidar work units, 3DEP can use older lidar at about 9.8 ft per pixel or a coarser model at about 33 ft per pixel. Fine output spacing cannot recover missing source detail. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Texas, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Is this a flood map?
No. It shows where terrain sends water and where it can sit, not flood depths for a given storm. For flood hazard, check FEMA’s flood maps and your city or county.
How small a flow path does it show?
Anything draining 0.25 acre or more on a property-sized area. On large areas the cut-off rises so the map stays readable, and the panel says where it sits. Tap any line to see how much land drains through it.
What does it miss?
Culverts, pipes, levees and ditches narrower than the sampling are not in the terrain, so water is routed over roads and through embankments. Bare-earth lidar also removes buildings. Check the result against what you see on site.
Ready to try it?
Open Water & Drainage on the map →Free to use, no account. The analysis runs in your browser on public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.