Property · Click a point
Select a Texas property boundary for terrain analysis
This Texas property boundary map loads the parcel under your click from the statewide TxGIO StratMap Land Parcels map and uses it as the analysis area for every other tool. Contours, slope, drainage, winter sun and the property report are then clipped to the parcel rather than a rectangle drawn by eye.
It is the starting point for most jobs on this site: find the place by address or name, select the parcel, then pick the question you want answered. The statewide map is compiled from the county appraisal districts’ parcel data. Local gaps, outdated geometry and missing identifiers can occur; the panel reports when no usable parcel is found.
Free to run · pay to download
Free to run, and free to save as a PNG image of the map. This tool has no file export of its own. For the terrain as a file, Download Data exports contours, a GeoTIFF or a 3D mesh with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months.
Who uses this
- Buyers. Measure the parcel they are actually buying, not the pasture next door.
- Architects and designers. Start a site analysis from the parcel boundary and property ID.
- Real estate agents. Pull terrain facts for a listing in a couple of clicks.
When to use it
- You want contours, slope, sunlight or drainage clipped to a parcel rather than a rectangle drawn by eye.
- You are comparing several properties and want each one measured on the same footing.
- You need the property ID, county and acreage alongside the terrain.
Tools for your job
Property is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Buying a lot or rural acreage
What is the ground like, and how does it compare with the others on my list?
- 1.Property (this tool) — Selects the parcel from the statewide appraisal-district map so every other tool is clipped to the boundary.
- 2.Property Report — A PDF with contours, slope, aspect, winter sun, drainage and elevation for that parcel, or several selected together.
- 3.Saved Properties — Up to 5 places side by side: elevation, slope, winter sun and drainage.
- 4.Water & Drainage — Terrain flow paths and potential ponding; rainfall and flood extent are not modeled.
- 5.Aerial History — Historical aerial photos of the spot, swiped against today: old roads, buildings and clearings.
How to use it
- Open Property and zoom in until parcel lines appear on the map.
- Click inside the parcel. The boundary is fetched and drawn as the analysis area.
- Search an address or place name in the top bar to jump to the area instead of panning.
- To take several parcels, Shift-click each one (Ctrl-click also works, or ⌘-click on a Mac), or turn on Add another parcel (handy on a phone). Click a selected parcel again to drop it. Select parcels in a box takes every parcel a box up to 1.2 miles across touches, roads, railroads and water left out. Up to 25 parcels at once, from any counties.
- Switch to any area tool. Its results are clipped to the parcel until you clear or redraw the area.
Step by step: the Texas Capitol grounds in Austin
We select the Texas Capitol grounds in Austin, in Travis County, so the other tools measure only inside the parcel.
1.Open Property from the tool rail and zoom in until the parcel lines show. The panel asks for a click.
2.One click inside the grounds fetches the boundary from the statewide parcel map, with the property ID, county and acreage in the panel. The outline is now the analysis area for every other tool.
What it showed
- The boundary follows the appraisal district’s parcel map, including corners you would never draw by eye. It is a GIS map, not a survey.
- Switch to Slope & Aspect, Sunlight or Water & Drainage. Each is clipped to this outline until you clear it.
How it works
The click is sent through this site’s server to TxGIO’s StratMap Land Parcels service, which compiles parcel maps from the county appraisal districts statewide. The returned parcel polygon supplies its property ID, county, appraisal district and available site address; owner and value details are dropped before anything reaches your browser. County lookup is only needed when no parcel is returned.
The polygon becomes a cookie cutter: terrain is loaded for its bounding box, and every tool masks its result to the polygon so nothing outside the boundary is counted.
Several parcels are merged into one area: neighbors join up and separate parcels stay separate, so tools measure all of them and nothing in between. Files from the Download tool still cover one rectangle around them all.
Reading the results
The panel shows the property ID, the county, the site address where the appraisal district publishes one, and the acreage measured from the outline. With several parcels it lists each one with its area and county, and the total.
Downloads from the other tools carry the parcel in their metadata. Parcel boundaries themselves are never put into a download file: no permission to redistribute the statewide parcel data has been confirmed.
Limits and caveats
- Parcel lines are the appraisal districts’ maps, drawn for property tax, not surveys. They can differ from fences, corners and recorded surveys on the ground. For a boundary question or a setback, hire a licensed land surveyor.
- The statewide compilation covers all Texas counties, but local gaps, outdated boundaries and missing identifiers can occur. If no usable parcel is returned, draw or upload the boundary instead.
- Very large rural parcels may exceed a tool’s area limit. The tool will say so; draw a smaller area inside the parcel instead.
- The statewide parcel service is a live external dependency. If it is down, no boundary is selected and a notice asks you to try again.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Texas, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Are parcel lines survey accurate?
No. Parcel maps are drawn by county appraisal districts for appraisal and tax records, and the lines can differ from fences, corners and recorded surveys on the ground. For a boundary question or a setback, hire a licensed land surveyor.
Can I search by address?
Yes. The search bar takes a street address or a place name anywhere in Texas and jumps there; then click the parcel. Searching by property ID is not available yet.
Can I select more than one parcel?
Yes, up to 25. Shift-click each parcel, turn on Add another parcel, or select every parcel in a box. The tools then analyze them together as one area, and one report can cover them all.
Why does no parcel come up where I click?
The statewide map covers every Texas county, but it is compiled from each appraisal district’s own data, so a parcel can be missing, outdated or drawn differently from the ground. A click on a road can also land between parcels. You can still draw the area by hand or upload a boundary file and use every tool.
Ready to try it?
Open Property on the map →Free to use, no account. The parcel is looked up in the statewide TxGIO StratMap Land Parcels service through this site’s server. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.