Water · Select a property, draw a box or polygon, or upload a boundary
Topographic wetness index map for Texas land
The topographic wetness index maps where the shape of the land tends to keep ground wet: lots of upslope area draining onto flat ground scores high, a steep ridge with nothing above it scores low. It is calculated from the USGS 3DEP lidar model with a 0.62 mi buffer so water from beyond the boundary is counted.
Use it to find fields that stay muddy, sites for wet-tolerant planting, and places to rule out early when you are looking for a septic drain field.
Free to run · pay to download
See the full result on the map free, with no account. Download the wetness index as a GeoTIFF with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months, a one-off payment in US dollars that never renews. Every download on the site is included while the pass lasts.
Who uses this
- Farmers. Target drainage tile and grazing on the ground that stays wet.
- Restoration planners. Match species to wet hollows and dry slopes.
- Septic designers. Screen for drain field locations before the soil tests.
When to use it
- Finding the parts of a field likely to stay wet, get muddy or need drainage tile.
- Choosing planting sites: wet-tolerant species in the blue areas, drought-tolerant on the tan.
- Screening a property for possible septic drain field locations before the soil tests.
Tools for your job
Wetness Map is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Drainage, flooding and wet ground
Where does the water go, and where will it sit?
- 1.Water & Drainage — The overland flow paths across an area, sized by the land draining through them, and where water ponds once low spots fill.
- 2.Downhill Path — Where rain from one spot ends up: the line it runs, and the stream it reaches.
- 3.Wetness Map (this tool) — Which parts of a field the shape of the land keeps wet.
- 4.Catchment — All the land that drains to one culvert, draw or low corner.
- 5.Landforms — Hollows, valleys and footslopes at a glance: where water gathers.
For the job: Farms, ranches, orchards and timber
Which ground suits which use?
- 1.Slope & Aspect — Equipment limits and erosion-prone slopes.
- 2.Sunlight — Sunny ground and shaded slopes in winter.
- 3.Wetness Map (this tool) — Wet-tolerant planting in the blue, drought-tolerant on the tan.
- 4.Landforms — Exposed ridges, sheltered hollows and well-drained spurs.
How to use it
- Select a property, draw an area or upload a boundary.
- Run. Tan is dry ground; deep blue is where water collects.
- Read the index range in the panel. The gradient bar and the map legend show the same two end values.
Step by step: Enchanted Rock
We map which parts of the ground around Enchanted Rock tend to stay wet.
1.Zoom to the area and run the analysis. Tan is dry ground, blue is where water collects. The panel shows the index minimum, mean and maximum.
2.Zoom in and the creek floors and the flat ground beside them stand out as the wettest ground.
What it showed
- The index is relative to this area. Use it to rank ground within one property, not to compare two places.
How it works
Water is routed downhill across the USGS 3DEP bare-earth model, with a 0.62 mi buffer loaded around the area so that upslope ground outside the boundary is counted. For each cell the tool takes the area draining into it and divides by the local slope. Lots of upslope area on flat ground gives a high value; a steep ridge with nothing above it gives a low one.
The number is the topographic wetness index, a standard hydrology measure. It is a relative ranking, not a moisture reading.
Reading the results
The colors are stretched between the 2nd and 98th percentile of the area, so the deepest blue is the wettest ground in this area, not a fixed threshold.
Minimum, mean and maximum in the panel are the true extremes; the bar shows where the colors stop changing.
Limits and caveats
- Terrain only. Soil type, water table, ditches and drainage tile are not known to the tool, and it is not a wetland determination.
- Culverts and barriers: under Culverts & barriers in Water & Drainage, Wetness Map and Catchment you can draw a culvert or drain the lidar can’t see, so water passes under a road, or a barrier such as a berm, so water goes around it. The same lines are used by all three tools. They are your assumption: the tool does not check them against the ground, and results and downloads say when they were used.
- Values are comparable within one run, not between different areas or dates.
- Outside the finest lidar work units, 3DEP can use older lidar at about 9.8 ft per pixel or a coarser model at about 33 ft per pixel. Fine output spacing cannot recover missing source detail. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Texas, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Is it a soil moisture reading or a wetland map?
Neither. It is a relative ranking from terrain shape alone. Soil type, water table and existing drains are not known to the tool, and wetland status needs a delineation by a qualified professional; the USFWS National Wetlands Inventory is a place to start.
Ready to try it?
Open Wetness Map on the map →Free to use, no account. The analysis runs in your browser on public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.