Terrain · Select a property, draw a box or polygon, or upload a boundary

Winter sun hours on any Texas lot

See the winter sun hours on a lot in Texas before you buy or build. The tool traces the sun across any day of the year in 15-minute steps and checks whether the bare-earth terrain up to 1.86 mi away blocks it.

December 21, the shortest day, is the test that matters for a house site: a lot can look sunny at a July showing and lose the sun behind a ridge or a canyon wall by early afternoon in winter. South-facing ground gets the most.

Free to run · pay to download

See the full result on the map free, with no account. Download the sun-hours grid as a GeoTIFF with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months, a one-off payment in US dollars that never renews. Every download on the site is included while the pass lasts.

Who uses this

  • Buyers. Check winter sun on a lot before a summer showing fools them.
  • Architects. Place living areas, decks and windows where the winter sun actually reaches.
  • Growers and solar installers. Find the ground that stays lit in December.

When to use it

  • Checking winter sun on a house site, a deck or a garden before you buy or build.
  • Comparing sunny and shaded parts of a property for planting or livestock.
  • Seeing when the sun first reaches a valley floor and when it leaves.

Tools for your job

Sunlight is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.

For the job: Solar panels and sun

Where will panels, a greenhouse or a deck get the most sun?

  1. 1.Sunlight (this tool) — Hours of direct sun on any date, with terrain shadows from up to 1.86 mi away. Start with December 21.
  2. 2.Slope & Aspect — The aspect view shows which faces point south, and the slope view how steep the mounting ground is.
  3. 3.Find Matching Areas — Highlights the ground that is flat enough, faces the right way and gets a minimum of winter sun, all at once.

For the job: Choosing a house site

Where on this property should the house go?

  1. 1.Find Matching Areas — Narrows the property to the patches that are flat, sunny and facing the right way.
  2. 2.Slope & Aspect — Shows gentler and steeper ground for a designer to assess.
  3. 3.Sunlight (this tool) — Checks winter sun on the candidate pad, hour by hour.
  4. 4.Cut & Fill — Estimates the excavation to level the pad before you ask for bids.
  5. 5.Viewshed — Models terrain visibility from a chosen eye height; surface blocking is regional.

For the job: Farms, ranches, orchards and timber

Which ground suits which use?

  1. 1.Slope & Aspect — Equipment limits and erosion-prone slopes.
  2. 2.Sunlight (this tool) — Sunny ground and shaded slopes in winter.
  3. 3.Wetness Map — Wet-tolerant planting in the blue, drought-tolerant on the tan.
  4. 4.Landforms — Exposed ridges, sheltered hollows and well-drained spurs.

How to use it

  1. Select a property, draw an area or upload a boundary.
  2. Pick a date: December 21 (the shortest day), an equinox, June 21 (the longest day), or any date you type.
  3. Run. Read total hours and first and last sun, then step through the day at half-hour marks to watch the shadows move.
  4. Download the sun-hours grid as a GeoTIFF for GIS. Downloading needs a pass.

Step by step: Enchanted Rock

We model December 21, the shortest day, across Enchanted Rock and the ground around it.

1.Zoom to the area or select a property. December 21 is the default, because winter sun is the test that matters for a house.

2.Preview on map. The panel shows the hours of daylight that day, the mean hours of direct sun and the share that gets at least three hours. The dark areas sit in terrain shadow.

3.Choose Step through the day and move the slider to see each half hour. The panel also shows when the sun first reaches the area and when it leaves, in Central time.

What it showed

  • South-facing slopes with an open southern horizon get the most winter sun; ground at the foot of a steep slope to its south stays in shadow for much of the day when the sun is this low.
  • Every tool is bare earth: trees and buildings cast no shadow here, so a patch under trees or beside a neighbor’s house can still show as sunny.

How it works

The sun’s position is computed for the chosen date every 15 minutes. At each step the tool casts shadows across the whole grid, and from any terrain within 1.86 mi. A cell outside every shadow is lit for that step.

Hours of sun add up the lit 15-minute steps. The blocking surface is the bare ground: trees and buildings are not in the elevation model for Texas, so a stand of trees or a neighbor’s house does not cast a shadow here.

Reading the results

December 21 is the test that matters for a house site. A south-facing slope with an open southern horizon will show the most hours.

First and last sun are the clock times, in Central time, when the sun first reaches and finally leaves any part of the area, not each cell.

Limits and caveats

  • Direct sun only. Cloud, haze, smoke and diffuse light are not modeled.
  • Shadows from anything further than 1.86 mi away, such as a distant ridge, are ignored. In deep canyons the true horizon may be further out.
  • Every tool on this site is bare earth: trees and buildings are not in the elevation model for Texas, so shade and views come from the shape of the ground alone.
  • Times are shown in Central time, with daylight saving time applied for the selected date. El Paso and Hudspeth counties and a corner of Culberson County keep Mountain time, an hour behind; the tool still reports Central time there.

Data and attribution

Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Texas, so Sunlight, Viewshed and Sightline work from the terrain alone.

USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.

Questions

Does it include shade from trees and neighboring houses?

No. Every tool on this site is bare earth: trees and buildings are not in the elevation model, so the hours are terrain shading only. A stand of trees or a neighbor’s house can shade a patch the tool shows as sunny.

Does it account for clouds?

No. It models direct sun on a clear day. Cloud, haze, wildfire smoke and diffuse light are not included.

What time zone are the times in?

Central time, on standard or daylight saving time as it applies on the chosen date. The tool uses Central time everywhere in the state, so in El Paso and Hudspeth counties, which keep Mountain time, local clocks read an hour earlier.

Ready to try it?

Open Sunlight on the map →

Free to use, no account. The analysis runs in your browser on public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.

Missing something you need? Suggest a feature or ask about custom work.