Find the Best House Site on Your Texas Land

A big wooded parcel, one house. Test every part of the property at once for slope, facing direction, winter sun, wetness and room for a pad, and see only the ground that passes them all.

Screen a property now

Select the parcel, pick the House site preset and run it. Matching ground turns green.

Open Find Matching Areas →

Why one map at a time is not enough

A good house site is several things at once: gentle enough to build on without a tall retaining wall, facing the sun, out of the ground where water gathers, and big enough for the house, the garage and somewhere to turn a truck. A slope map shows the first, a sunlight map the second, a wetness map the third. Laying them over each other in your head is where site visits get wasted.

Find Matching Areas does the overlay for you. Every cell of the USGS 3DEP bare-earth model is tested against each condition, and a cell is green only when it passes every one.

The conditions

  • Slope is at most… in degrees, from the terrain. Always on.
  • It faces… north, east, south or west (each within 45° either side), or any way. Flat ground has no facing direction, so it only passes when any direction is allowed. Always on.
  • Winter sun is at least… hours of direct sun on December 21, the shortest day, with shadows from terrain up to 1.86 mi away. Always on; set it to 0 to ignore sun.
  • It isn't in the wettest… percent of the area, by the same topographic wetness index as the Wetness Map. Under More conditions.
  • There's room for a square… of the width you set, with every cell inside it passing. A long thin strip can pass every other test and still have nowhere to put a house; this removes it. Under More conditions.

The presets

Start from one of these and change any number. They are sensible first guesses, not rules.

PresetSlope at mostFacesWinter sunNot in the wettestRoom for a square
House site12°Any4 h or more20%60 ft
Solar panels20°South5 h or moreNot tested15 ft
Orchard or vineyard15°South4 h or more25%100 ft
Septic drainfield10°AnyNot tested30%50 ft
Shed or shop5°AnyNot tested20%30 ft

Whatever the preset says, the slope your house can sit on depends on the foundation, the access and what the city or county requires. Ask them, and your designer, before you design to a number.

How to find a house site

  1. Select the property. Click the parcel, draw a box or polygon, or upload a boundary. Without a selection, Analyze this view uses the area on screen.
  2. Pick House site, or another preset, or set the three sentences yourself. Open More conditions for wetness and room to build.
  3. Choose Run analysis. Matching ground is green, everything else gray.
  4. Read What each condition leaves. It lists the ground remaining after each test in turn, in area and as a share. The condition that removes the most is highlighted: relax that one first if too little is left.
  5. Check the near misses. Tick Show ground that misses by one condition to color amber the ground that fails exactly one test.
  6. Use the best patch. Largest patches lists the five biggest matching patches. Use as area makes one of them the selected area for the next tool.

A Texas example

On a Hill Country parcel, around Wimberley or in the hills along the Guadalupe near Kerrville, the gentle ground is usually on the divides and in the creek bottoms, with steep limestone slopes between. The slope test alone keeps both. Add winter sun and the valley floor can drop out, because the valley walls shade it in December; add the wetness test and the low ground beside the creek goes too. What is left is often a few patches on the ridge tops and shoulders.

On flatter ground, across the Blackland Prairie or the Gulf Coast plain, slope rarely rules much out. There the wetness test and room for a pad do most of the work, removing the shallow depressions and low swales where water stands after heavy rain.

What it cannot tell you

The result is terrain only. It does not know about zoning, deed restrictions, setbacks, access from the road, utilities, soils, septic suitability, flood hazard or ground stability. Check on-site sewage (septic) rules with the county and the TCEQ, flood hazard on the FEMA flood maps, and the rest with the city, or the county outside city limits. Winter sun counts the shape of the land, not the trees on it.

About the data

Ground elevations come from the USGS 3D Elevation Program (3DEP) seamless bare-earth model, with elevations above NAVD 88. Source cells are 3.3 ft per pixel in the finest work units, with about 9.8 ft per pixel and 33 ft per pixel sources elsewhere. USGS elevation data is public domain. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. Areas up to 7.5 miles per side can be searched; larger areas are sampled more coarsely. More from the USGS 3D Elevation Program and Texas elevation and lidar resources.

Frequently asked questions

How do I find the best place to build on my land?

Select the property, open Find Matching Areas and pick the House site preset. The tool tests every part of the parcel for slope, facing direction, winter sun, wetness and room for a square pad, and colors the ground that passes every test green. Those patches are the places worth walking first.

Are the preset numbers rules?

No. They are starting points, and the panel says so. The city or county, your deed restrictions, your designer and the way you intend to build decide what slope and pad size actually work. Change any number after picking a preset.

Nothing came up green. What now?

Look at What each condition leaves. The condition that removes the most ground is highlighted; relax that one first. Turning on Show ground that misses by one condition colors amber the ground that fails only one test, which shows where a small change in a number gains the most.

Does it account for trees shading the site?

No. Winter sun is modeled on bare ground for December 21, with shadows from terrain up to 1.86 mi away. A patch behind a stand of pines or live oaks can still show as sunny. Check the aerial basemap, or clear trees in your head before you trust a sunny result in the woods.

Does it check zoning, setbacks or septic suitability?

No. It is terrain only. Zoning, deed restrictions, setbacks, access, utilities, septic approval, flood hazard and ground stability are checked with the city or county and the right professionals. The tool finds the ground worth asking them about.

How big an area can I search?

Areas up to 7.5 miles per side. Larger areas are sampled more coarsely, so small pads can disappear; select a smaller area, such as one parcel, for detail.

Related guides