Texas Elevation Lookup: Find the Elevation of Any Point
Checking a building site, a flood question or just curious how high your place is? Click any point in Texas and read the ground elevation in feet, from the USGS 3D Elevation Program's lidar.
Ready to find your elevation?
Open the tool, click anywhere on the map and see the elevation at that spot in feet above sea level.
Look up an elevation →Find the elevation of any point in Texas
The Point Elevation tool (formerly Add Elevation) reads the USGS 3DEP seamless bare-earth model at the point you click: 3.3 ft per pixel where lidar meets the USGS standard for its finest DEM. The answer comes back in feet above NAVD 88, with the coordinates of the point and the cell size the terrain tiles were read at.
Unlike a phone's altitude reading, which comes from satellite geometry or a barometer, the elevation here comes from an airborne laser survey of the ground itself. No account, nothing to install.
Why you might need an elevation
- Building and remodeling: foundations, drainage and driveways all start from the existing ground level, and some permit questions turn on elevation. The city, or the county for floodplain and septic rules, will tell you which.
- Flood questions: how high a lot sits relative to a nearby creek, bayou or river is the first thing to know before reading the FEMA flood maps.
- Buying property: a few clicks show whether a lot sits on a rise or in a low spot where water may collect.
- Farm and drainage planning: high ground, low ground and the fall between them decide ditches, stock tanks, terraces and irrigation.
- Fieldwork and research: geography, ecology and geology all need reliable point elevations.
How to look up an elevation
- Open the map. It opens on the whole state; switch between aerial, topographic and relief basemaps as you like.
- Find your location. Search an address or a place name, or pan and zoom to the spot — a corner of a lot, a trailhead in the Hill Country, a field near Lubbock.
- Choose Point Elevation and click. The tool reads the elevation model at that point.
- Read the result. The elevation appears in feet, with the coordinates so you can confirm you clicked the right spot.
Click again to add another numbered point and compare elevations across a site. With a pass, download the list as CSV, GeoJSON or DXF.
Check the elevation anywhere in Texas
Click any point and get the ground elevation in feet above sea level, from USGS 3DEP lidar.
Understanding the number
The elevation is the height of the ground above the NAVD 88 vertical datum, the national reference for heights in the United States, shown in feet. Zero is approximately mean sea level; a reading of 250 ft means the ground there is about 250 ft above that reference.
It describes the bare ground, not the roof of a building or the top of a tree: lidar separates ground returns from everything above them, and the 3DEP model keeps the ground. That is what planners, builders and engineers need. This site has no surface model of what stands on the ground, so every tool on it is bare earth.
Common uses
Building permits and planning
Elevation is part of many site questions a permitting office asks about. A quick reading gives you a reference point for early design; the city, or the county for subdivision, floodplain and septic rules, decides what it needs for the permit itself.
Flood risk
Comparing your lot's elevation with the nearby water and the FEMA flood maps is a sensible first step on any low-lying property along a Gulf Coast bayou, a Hill Country river, the coast or a smaller creek.
Comparing sites
A lot on a gentle rise behaves very differently in a heavy storm from one on a river flat. Clicking a few points on each shows the difference.
Agriculture and drainage
Sampling elevations across a field finds the high ground, the natural drainage lines and the spots where water stands after rain.
School and education projects
Students can explore how elevation rises from the Gulf Coast inland across the prairies and the Hill Country, or from the High Plains down the caprock escarpment into the canyons below.
Elevation for building and construction
Builders, architects and project managers use elevations throughout design. Where an elevation requirement applies to a lot, the city or county office that set it will tell you what it is and how it must be measured; knowing the existing ground level early tells you roughly how far the design has to go.
- Stormwater: the fall between an inlet and an outlet decides whether a pipe drains.
- Cut and fill: existing ground versus finished grade is the starting point of every earthwork estimate — see the Cut & Fill tool.
- Retaining walls: the elevation at the top and bottom of a proposed wall sets its height.
- Driveways: the elevation at the road and at the garage gives the grade. The Elevation Profile tool shows it along the whole line.
A lidar reading is not a substitute for a topographic survey by a licensed land surveyor, but it is an excellent starting point for feasibility, preliminary design and due diligence.
Accuracy: lidar versus other sources
USGS 3DEP lidar (used here). Where lidar meets the USGS standard for its finest DEM, the vertical accuracy is that of the lidar project behind it, which varies by project and is not asserted by this tool.
Global elevation models used by many map apps are roughly 100 ft per cell or coarser and often record treetops, so readings can be far off on steep or forested ground.
Phone and handheld GPS altitude is derived from satellite geometry or a barometric sensor and is usually the least accurate number you have, especially in valleys and under trees.
Coverage across Texas
Ground elevations come from the USGS 3D Elevation Program (3DEP) seamless bare-earth model, with elevations above NAVD 88. Source cells are 3.3 ft per pixel in the finest work units, with about 9.8 ft per pixel and 33 ft per pixel sources elsewhere. USGS elevation data is public domain. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. Where a point falls outside every lidar work unit, the result shows the coarser resolution. Check any address on the lidar coverage page to see which project flew it and when. More from the USGS 3D Elevation Program and Texas elevation and lidar resources.
Data source
- Source: USGS 3D Elevation Program (3DEP) seamless bare-earth DEM
- Resolution: 3.3 ft per pixel where lidar meets the USGS standard for its finest DEM, coarser (down to about 33 ft per pixel) elsewhere
- Vertical datum: NAVD 88, shown in feet
- License: U.S. Government work, public domain
Frequently asked questions
What is the elevation where I am?
Open Texas Elevation Tools, search your address or zoom to where you are, choose Point Elevation (formerly Add Elevation) and click the map at your position. The tool returns the ground elevation in feet from the USGS 3DEP elevation model, which is usually far more reliable than the altitude your phone reports.
How accurate is the elevation lookup?
Accuracy depends on the source project, its date and how well ground was measured; this site does not assign one accuracy figure to all Texas. Source cells range from 3.3 ft per pixel in the finest work units to about 9.8 ft per pixel or 33 ft per pixel in coarser sources. Every download reports the share outside the finest lidar work units, or says coverage is unknown if the index cannot be reached. Bare-earth elevations exclude buildings and tree canopy and do not replace a surveyed elevation for legal or engineering decisions.
Can I use the elevation for a building permit application?
It is a good reference for preliminary design and for understanding a site before you talk to the permitting office. Where a specific elevation matters to a permit — a flood elevation, a finished floor level, a height limit — the city, or the county outside city limits (for example for floodplain rules), will say how it must be established, and that is often a survey by a licensed land surveyor. Check with them before you rely on it.
Does it work everywhere in Texas?
Yes. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. Where no lidar work unit meets the USGS standard for its finest DEM, the USGS 3DEP seamless model uses coarser data, and the tool shows the source resolution with every reading.
What does the elevation number mean?
It is the height of the bare ground above the NAVD 88 vertical datum, the US reference for “above sea level”, shown in feet. It describes the ground surface, not the top of a building or a tree.
Can I look up elevation for many points at once?
The map reads one point per click. For many points, upload a CSV of coordinates, or a GPX, KML or GeoJSON file, to Elevate a File and download it with an elevation added to every point.
Data sources and further reading
Point lookups read the same public USGS elevation model you can download yourself. These are the sources.
Primary sources
- USGS 3D Elevation Program (3DEP) seamless DEM — The bare-earth source for terrain tiles, contours, profiles, statistics, downloads and elevation added to files. Source resolution varies: 3.3 ft per pixel in the finest work units, with older lidar and coarser seamless data elsewhere. Elevations are above NAVD 88. Public domain. Selecting a fine output grid cannot create detail missing from the source.
- Texas Geographic Information Office (TxGIO) StratMap elevation lidar — The state’s lidar program and downloads for Texas. This site uses the USGS 3DEP index for work-unit coverage and available project metadata; it does not infer an acquisition date or accuracy for all Texas from one project.
- TxGIO StratMap Land Parcels — Statewide parcel boundaries compiled by the Texas Geographic Information Office from county appraisal district data. The Property tool queries the public statewide service. Local gaps, outdated boundaries and missing property IDs can occur; no parcel found is not proof that land is unowned. Parcel maps are not legal surveys.
- USGS Geographic Names Information System (GNIS) — Texas place names for search, including towns, peaks, lakes, streams and other named features.
- Basemaps — USGS Topo and Esri World Imagery — USGS Topo, shaded relief rendered from 3DEP, and Esri World Imagery (Imagery: Esri, Maxar, Earthstar Geographics, and the GIS User Community) provide map context. The aerial basemap is display-only. Downloadable aerial photos come from public-domain USGS NAIP imagery.
Search, basemaps and terms
- USGS copyrights and credits — The USGS public-domain policy and requested credits. Other publishers’ layers have their own terms.
Related guides
- Contour lines for Texas — contour maps for any area.
- Elevation profiles for hiking — the climb along a trail.
- Add elevation to CSV files — elevations for a whole spreadsheet of points.
- Lidar data for Texas — the data behind the numbers.
- Topographic maps of Texas — custom topo maps from lidar.