Terrain · Select a property, draw a box or polygon, or upload a boundary
Elevation statistics for any Texas property
Find the elevation of your property: the highest and lowest ground, the mean and the range, in feet, measured over every cell of the parcel from the USGS 3DEP lidar elevation model. A chart shows how much of the land sits at each elevation.
Handy for flood, frost and planting questions, and for knowing how far above sea level a house site really is.
Free to run · pay to download
Free to run, and free to save as a PNG image of the map. This tool has no file export of its own. For the terrain as a file, Download Data exports contours, a GeoTIFF or a 3D mesh with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months.
Who uses this
- Owners and buyers. Know how high the property sits, for flood and frost questions.
- Growers and vineyard managers. Find the frost-prone low ground and the elevation band of a block.
When to use it
- You want the highest and lowest points on a property, or the elevation of a house site.
- You need the elevation range for a flood, frost or planting question.
- You want the ground elevation, not the height of what is standing on it.
Tools for your job
Terrain Stats is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Plans, CAD, GIS and 3D printing
I need the terrain as a file.
- 1.Download Data — Contours, a GeoTIFF elevation model, a 3D DXF or LandXML ground surface, a georeferenced aerial photo or a 3D mesh for printing.
- 2.Data Here — Which USGS lidar surveys cover a spot, when each was flown, and where to get its files.
- 3.Elevation Change — Where USGS lidar was flown twice: whether the ground has slid, been filled or been cut between the surveys, as a GeoTIFF.
- 4.Contour Lines — Contours previewed on the map before you export them.
- 5.Elevate a File — Adds ground elevation to your own GPX, KML, GeoJSON or CSV points.
- 6.Point Elevation — Spot elevations at the points you click or on a grid over a lot, as CSV, GeoJSON or DXF.
- 7.Terrain Stats (this tool) — The highest, lowest and mean ground elevation of an area, and how the land is spread between them.
How to use it
- Select a property, draw an area or upload a boundary.
- Run. The panel lists the statistics and draws the elevation distribution.
Step by step: Enchanted Rock
We summarize the ground elevation across Enchanted Rock and the ground around it.
1.Zoom to the area or select a property, then choose Compute statistics.
2.The panel lists the area, the lowest and highest points, the elevation range, the mean elevation and the mean slope.
What it showed
- Elevations are in feet above NAVD 88: bare ground, not roofs or tree tops.
How it works
Every cell of the USGS 3DEP bare-earth model inside the area is read, and the statistics are taken over those cells. The distribution chart, called a hypsometric curve, bins the cells by elevation so you can see whether the land is mostly high, mostly low or evenly spread.
Reading the results
Elevations are feet above NAVD 88, which is close to mean sea level.
A long, flat distribution means a steady slope; a tall spike means mostly flat ground at one elevation.
Limits and caveats
- Areas up to 3.7 miles per side.
- Outside the finest lidar work units, 3DEP can use older lidar at about 9.8 ft per pixel or a coarser model at about 33 ft per pixel. Fine output spacing cannot recover missing source detail. Lidar coverage and source dates vary across Texas. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown.
- Bare ground only: buildings and trees are not included.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Texas, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Texas parcel boundaries are compiled from county appraisal district data, not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Is the elevation above sea level?
It is feet above NAVD 88, the national vertical datum, which is close to mean sea level. For design elevations, check against a survey benchmark.
Ready to try it?
Open Terrain Stats on the map →Free to use, no account. The analysis runs in your browser on public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.